Laser welding machine is a laser material processing machine, which is divided into laser mold welding machine, automatic laser welding machine, laser spot welding machine, fiber transmission laser welding according to its working mode. Machine welding is to use the high-energy laser pulses to locally heat the material in a small area. The energy of the laser radiation diffuses into the material through heat conduction, and the material is melted to form a specific molten pool for welding purposes.

The guide rail and linear shaft of the laser welding machine is one of its main components, and its function and importance are ignored by many people. People tend to think that it only serves as a simple guide and support.

Laser welding machines are precision equipment with very high precision requirements, which require very high guiding precision and smoothness of motion. However, the laser welding machine will have slight vibration during operation, so its guide rails and linear axes not only guide and support, but also require high guiding precision and good motion stability.

Moreover, due to the large amount of corrosive dust and smoke generated during processing, the smoke and dust are deposited on the surface of the guide rail and the linear shaft for a long time, which has a great influence on the processing precision of the equipment and will be on the surface of the linear axis of the guide rail to shorten equipment life.

Therefore, in order to make the machine work stably and ensure the processing quality of the products, we must carefully carry out the daily maintenance of the guide rails and linear axes.

Cleaning the linear guide: first move the laser head to the far right (or left side), find the linear guide, wipe it with a dry cotton cloth until it is bright and dust-free, plus a little oil (can use sewing machine oil, do not use motor oil) , slowly push the laser head a few times to allow the lubricant to be evenly distributed.

Cleaning the roller guide: Move the beam to the inside, open the end cover on both sides of the machine, find the guide rail, wipe the place where the guide rails on both sides are in contact with the roller with a dry cotton cloth, then move the beam to clean the remaining place.

Wuhan Perfect Laser Co., Ltd. focuses on the laser equipment industry for 20 years and independently develops and produces various types of welding machines. The products are widely praised by users at home and abroad. Compared with traditional welding machines, laser welding machines are more flexible, with higher welding precision and better welding results.

For more information, please click to Perfect Laser laser welding machine.